

The AuraGain is Ambu’s 3rd generation laryngeal mask, satisfying 3 fundamental airway management needs by integrating gastric access and intubation capability in an anatomically curved single-use device that facilitates rapid establishment of a safe airway.
The original anatomical curve is pre-formed to follow the anatomy of the human airway, and the soft rounded curve of the AuraGain ensures rapid placement and guarantees long-term performance.
The thin and soft cuff of the AuraGain is designed to deliver high seal pressures - documented up to 40 cm H2O.*
The integrated gastric access channel is designed with a low friction inner surface to facilitate easy placement of a gastric tube. Introduce a gastric tube through the device and into the stomach of the patient to enable active and passive management of gastric content, and prevent gastric insufflation.
The AuraGain provides the added safety feature of intubation capability. This means that in case of an unexpected difficult airway, or a “Cannot Intubate – Cannot mask Ventilate” (CI-CV) situation, where the end-game is to intubate the patient, AuraGain can be used as conduit for direct endotracheal intubation assisted by a flexible scope (such as the Ambu® aScope3).
Rapid placement, high seal pressure, gastric access, and intubation capability make the AuraGain the obvious and safe choice for every procedure where a laryngeal mask is indicated.



The Parker Flex-Tip tracheal tube has a flexible, curved, centered, tapered distal tip geometry that is designed to facilitate rapid, easy, non-traumatic intubation. When this unique, patented tip is advanced into contact with protruding features of the airway (such as the vocal cords and nasal turbinates), it is designed to flex and slide gently past them, instead of getting hung up on them and traumatising them.

When a standard, side-beveled tube is railroaded down an introducer (flexible fiberoptic scope, bougie, or tube exchange catheter), a gap commonly exists between the tub's distal edge and the introducer. The gap frequently causes a blind hang-up of the standard tube on the larynx.
In contrast, the tip of the Parker tube is designed to lie closely against the introducer, thus preventing or minimizing any gap between the tube tip and the introducer that could result in hang-ups on airway structures.

Unlike the broad, side-beveled tips of standard tracheal tubes, the tapered, centered tip of the Parker tube tends to move along the midline of the airway and through the center of the glottic opening. After entering the trachea, the resilient tip returns to its original shape, and is configured to "ski" smoothly down the tracheal wall on its broad, curved backside – unlike the tips of standard tracheal tubes which tend to scrape the tracheal wall.








Included in our Airway Portfolio are a diverse range of Introducers, Stylets and Tube Exchangers. Designed to assist in all intubations, ranging from the routine to the most challenging.
To offer devices with the highest performance and level of innovation, we have aligned with the following respected brands.

VBM offers different adjuncts for the difficult airway to facilitate the placement of an Endotracheal Tube into the trachea. These include:



Revolutionary new intubation guide – combining the benefits of stylets and introducers in one device for optimal airway management.
3 benefits in 1:
Download VBM Introducer/Stylet Brochure
Download Complete Set of Introducers Brochure
Download VBM i Bougie Brochure

Constructed from malleable aluminium covered with a plastic sheath. 4 Sizes available to cover full range of ET Tubes
Highly functional product to assist in a wide variety of intubation processes.


The G-LT is an extraglottic tube with a ventilation lumen and an endoscopy lumen for control of airway patency during gastrointestinal endoscopic procedures.
The G-LT is designed for obtaining and maintaining control of airway patency during medium to long-term complex gastrointestinal endoscopic procedures performed on adults under deep sedation or general anaesthesia while maintaining spontaneous or assisted ventilation.
Diagnostic ERC (Endoscopic Retrograde Cholangiography)
Diagnostic and therapeutic ERCP (Endoscopic Retrograde Cholangiopancreatography) for pancreatic and biliary disease:
Brush cytology and biopsy
Endosonografic gastrointestinal diagnosis
Removal of bile and pancreatic duct stones
Papillotomy or duodenal ampulla dilation
Treatment of biliary strictures (endoprosthesis, stent placement)
Palliation of malignancy: obstructive jaundice (drainage decompression)
The G-LT can also be used for performing short term or minor duodenal and oesophageal gastric endoscopies whenever the patient has particular high risk factors or refuses conscious sedation/anxiolysis and asks for deep sedation or anaesthesia, or whenever there are specific indications.

| G-LT | Adults ≥155cm | VB32.90.004 |
Download Gastro-Laryngeal Tube Brochure


The Well Lead Endobronchial Blocker Tube is designed to differentially intubate a patient's bronchus in order to isolate the left or right lung, in procedures that require single lung ventilation.
Available in 5Fr, 7Fr and 9Fr to cover both adult and paediatric patients.
The Ultrathin cuff is constructed from medical grade polyurethane and has a thickness of 0,028mm. Aside from being very soft and providing a high level of comfort, the ultrathin cuff forms a superior seal and minimises the risk for microaspiration. When deflated it sits tightly against the body of the blocker tube minimising the potential for airway trauma during insertion and extubation.
The hub of the blocker tube works with a user friendly twist lock design to promote secure locking.
Product code - WL67100090
9F Endobronchial Blocker Tube
Tube length - 695mm
Cuff length - 18mm
Resting cuff diameter - 15mm
Product code - WL67100070
7F Endobronchial Blocker Tube
Tube length - 695mm
Cuff length - 16mm
Resting cuff diameter - 12mm
Product code - WL67100050
5F Endobronchial Blocker Tube
Tube length - 640mm
Cuff length - 10mm
Resting cuff diameter - 8mm


The Ambu® Aura-i™ is pre-formed to follow the anatomy of the human airway. The soft rounded curve ensures fast and easy placement and guarantees long-term performance.
It is the preferred everyday routine device for establishing an airway where an ET-tube is deemed unnecessary. At the same time it holds a place on the difficult airway cart. In case of a “Cannot Intubate – Cannot mask Ventilate” (CI-CV) situation, where the end-game is to intubate the patient, the Ambu® Aura-i™ can be used as conduit for direct endotracheal intubation assisted by a flexible scope (such as the Ambu® aScopeTM). The airway tube is designed to allow easy passage of an appropriately sized ET-tube. The recommended ET-tube size is indicated on the connector block of the mask.
Built-in anatomically correct curve for easy atraumatic insertion
Intubating capability using standard ET-tubes
Reinforced tip resists folding over during insertion and plugs the upper oesophageal sphincter
Bite resistance in the connector block prevents occlusions
Convenient depth marks for monitoring correct position
Pilot balloon identifies mask size and provides precise tactile indication of degree of inflation
Navigation marks for guiding Fiber/Videoscope
ET-tube size indication on the connector block
Packaged sterile and ready to use
8 different mask sizes covering infant, pediatric and adult patients
Download Aura-i with aScope Brochure


The challenge of a flexible laryngeal mask is the combination of needs: the ease of insertion and security of the airway needed by the anesthesiologist, the flexibility and room to work needed by the surgeon and the need to protect the patient from residual proteins.
Ambu® AuraFlex™ combines these needs in an innovative, single-use solution.



The Ambu® Aura40™ is the world's first reusable laryngeal mask to feature a built-in curve that carefully replicates natural human anatomy. This curve is molded directly into the tube so correct insertion is easy without abrading the upper airway.
This unique curve also ensures that the patient's head remains in a more natural position when the mask is in use without extra stress on the upper jaw. Moreover, Aura40 is specially designed to give the airway tube the flexibility needed to adapt to individual anatomical variances and a wide range of head positions.
Aura40 also features a reinforced tip, which helps prevent folds during insertion that can cause improper positioning and possible airway leak. Convenient depth marks provide a visual indication of the mask position and the flat underside of the tube makes it easier to grip. In short, positioning is fast and accurate, each and every time.






The Ambu AuraOnce™ Disposable Laryngeal Mask features a special curve that carefully replicates natural human anatomy. This ensures that the patient's head remains in a natural, supine position when the mask is in use.
